DC-CDI based on ATMEL Tiny2313.
A great job from Ivan A Gritskov from Russia.
Synoptic.
Principle.
Ivan has used the Atmel DC-CDI originaly designed for a XT600, and modify it in order to fit a DRZ400S.
He also used a Tiny2313 which has the same pinout a 89C2051, except the Reset pin which work in a opposite way.
The software has been re-writed using BASIC-AVR and the advance curve has been changed too.
Software.
| Source | Hex | |
| DC-CDI with ATMEL for DRZ400S |
drz400s.BAS | drz400s.HEX |
Forum related to the program: http://bascomavr.3bb.ru/viewtopic.php?id=449
Schéma.
| Atmel DC-CDI for DRZ400S |
Schéma | Composants |
| Schéma.PNG |
liste.txt |
Compare to 89C2351 version, there are 4 differences:
IC3 at89c2051 -> attiny2313 crystal 24MHz -> 20MHz C5 (22uF 16V) -> 1k resistor R15 (4,7k) -> 0.1uF capacitor
Printed Circuit Board.
Realisation
Videos
http://www.youtube.com/watch?v=ZNIWDkVSxYQ
http://www.youtube.com/watch?v=xnwkEr6kR98